• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • D/C: 2017
  • Package: smd
  • Model Number: VT-CC1120PL-433M
  • Type: wireless module
  • Brand Name: V-CHIP
  • Place of Origin: Guangdong, China (Mainland)
  • Product name: 3000M 1200Bps-200Kbps Data Rate Wireless Transmitter Module
  • Operating supply voltage: DC 3.0~3.6V
  • Central frequency: 433MHz
  • Frequency accuracy: ±10ppm
  • Modulation format: 2-FSK/4-FSK/2-GFSK/4-FSK/MSK/OOK
  • Transmit power: MAX:26dBm(3.3V)
  • TX current consumption: ≤250mA
  • Receiver sensitivity: -125dBm
  • RX current consumption: ≤25mA
  • Sleep State current consumption: <1uA

Packaging & Delivery

Packaging Details Standard package
Delivery Time Shipped in 3 days after payment

Durable 22Dbm 3000M 1200Bps-200Kbps Data Rate Wireless Transmitter Module

 

VT-CC1120PL-433M is based on RF Transceiver CC1120 of TI Chipcon,CC1120 is fully integrated single-chip radio transceiver designed for high performance at very low power and low voltage operation in cost effective wireless systems. Added PA, LNA circuit, enhanced output power and sensitivity.The module integrated many RF functions thus you can use it conveniently and reducing your development time.    

Detail Parameters

 

 

Test operating conditions:Ta=25°C,VCC=3.3V if nothing else stated.

 

Parameter

Type

Condition/Note

Operating supply voltage

DC 3.0~3.6V

 

Frequency range

410-480MHz

Programmable

Frequency accuracy

±10ppm

 

Modulation format

2-FSK/4-FSK/2-GFSK/4-FSK/MSK/OOK

Programmable

Transmit power

MAX:26dBm(3.3V)

Programmable

Receiver sensitivity

-125dBm

1.2kbps DEV=4KHz RX BW=25KHz

TX current consumption

≤250mA

 

RX current consumption

≤25mA

 

Sleep State current consumption

<1uA

 

Transmit distance

5000M

 

Antenna impedance

50ohm

 

Operating voltage

3.0~3.6V

 

Operating temperature

-40~+85 °C

 

Storage temperature range

-40~+125°C

 

Dimension

36.3×22.2mm×4.0 mm(With shield cover)

 

Note:

1. The module transmission data rate will affect Transmission distance ,the higher the data rate , the closer the distance, and the lower the receiving sensitivity.

2. The supply voltage to the module will affect TX power, in the operating supply voltage range, the lower the voltage, the lower the TX power.

3. The module central frequency will change as the operating temperature change, use it under suggest temperature, the module can work well.

4. The antenna will strongly affect the communication distance, please select matched antenna and connect it correctly.

5. The module mount will affect the communication distance.

Features

 

Applications

 

 

 

Pin name

Pin type

Description

RESET_N

Digital in

Reset; low level valid

GDIO3

Digital in/out

Digital I/O, register configuration

GDIO2

Digital in/out

Digital I/O, register configuration

SI

Digital In

Digital in (SPI)

SCLK

Digital In

Time input (SPI)

SO/GPIO1

Digital In/out

Digital output (SPI) or general digital In/out port

GDIO0

Digital In/out

Digital I/O, register configuration

CSN

Digital I/O

Module select (SPI), low level valid

RE

Status control

RX=0,TX=1,SLEEP=0

TE

Status control

RX=1,TX=0,SLEEP=0

GND

ground

 

ANT

Antenna port

Impedance 50 ohm

3.3V

Work power

DC 3.0-3.6V

VDS

Power amplifier

Power amplifier, default short circuit

 

 

 

Configuration Registers

The configuration of CC1120 can be done with software SmartRF Studio7. Complete descriptions of the registers are given in the CC1120 datasheet. We can provide evaluation board and demo code to the customer to develop and evaluate the module’s capability.

Related Product
Company Information

 

Packaging & Shipping

 

FAQ

Description

Reason and Solution

Can’t communication

1.The power supply connect not well, check the module VCC whether it is out of maximum rating.

2.The signal line connect not well, check the module SPI interface.

3.The settings of the transmitter module and receiver module are not the same. Check these modules’ register configuration.

4.Signal block. If the transmitter work with a high TX power, and the receiver was put at a short distance(<0.5m), maybe there is a signal block to make no communication.

Communication distance is too short

1.The application environment is too bad or the antenna is shield. Put the antenna to a better place outside or higher throw a coaxial line , replace it with a higher gain antenna.

2.The work space contains a same frequency interference source, or a strong magnetic field interference, power source disturbance. Try to change the carrier frequency or get far away from the source of the disturbance.

3.The power supply is not strong. Check the voltage and the current whether it is enough.

High data error

1.The power supply ripple is too big, Change the power supply.

2.Check the module register configuration, it is recommended to set as the CC1120-datasheet.

3.There is a carrier frequency interference, change the channel.

4.The antenna unmatched to the module RF interface, change another matched antenna.

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland)
Transaction Level:
Supplier Assessments:
22 Transactions 3,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $27,000
Learn More