Long Range 868MHz CC1110 SPI Rf Transceiver 433MHz Wireless Module

FOB Reference Price:Get Latest Price
  • >=10 Pieces
    $3.00
Report Suspicious Activity
Overview
Quick Details
D/C:
2018
Package:
smd
Model Number:
VT-CC1110PA-433/868/915M
Type:
wireless module
Brand Name:
V-CHIP
Place of Origin:
Guangdong, China (Mainland)
Product name:
Long Range 868MHz CC1110 uart Rf Transceiver Wireless Module
Operating supply voltage:
DC 2.4~3.6V
Central frequency:
433MHz/868MHz/915MHz
Frequency accuracy:
±10KHz
Modulation format:
GFSK/2-FSK/ASK/OOK/MSK
Transmit power:
-10~+20dBm
TX current consumption:
<110mA
Receiver sensitivity:
-110dBm
RX current consumption:
<22mA
Sleep State current consumption:
<2uA
Supply Ability
Supply Ability:
10000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
Standard package
Port
Shenzhen

Long Range 868MHz CC1110 spi Rf Transceiver 433MHz Wireless Module

 

VT-CC1110PA-433/470/868/915M is based on RF Transceiver CC1110 of TI Chipcon,it’s a small size and ultra low power UHF wireless module. CC1110 is a low cost true single chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, The max RF output power can be set as high as +10dBm, with data rate as high as 500Kbps. The module integrated PA to make the maximum output power up to +20dBm. The integrated EEPROM on the module can be used to store important data. Customer can use it conveniently and reducing your development time.

Detail Parameters

 

 

Test operating conditions:Ta=25°C,VCC=3.3V if nothing else stated.

 

Parameter

Type

Condition/Note

Operating supply voltage

DC 2.4~3.6V

 

Central frequency

433MHz/868MHz/915MHz

Can be programmable to other frequency in bands 433/868/915±5MHz

Frequency accuracy

±10KHz

 

Modulation format

GFSK/2-FSK/ASK/OOK/MSK

Programmable

Transmit power

-10~+20dBm

Programmable

TX current consumption

<110mA

Po=20dBm

Receiver sensitivity

-110dBm

2.4Kbps

RX current consumption

<22mA

2.4Kbps

Sleep State current consumption

<2uA

Power Mode 3

Data rate

1.2~500Kbps

Programmable

Spurious harmonics

< -30dBm

TX power +10dBm.

Communication distance

>800m

2-FSK modulation, 2.4Kbps data rata, +20dBm output power.

Antenna impedance

50ohm

PCB antenna

Operating temperature

-20~+75 °C

 

Storage temperature range

-50~+125°C

 

Dimension

31.5 mm×27.0 mm×13.1mm

See more in PCB description

Note:

1. The module transmission data rate will affect Transmission distance ,the higher the data rate , the closer the distance, and the lower the receiving sensitivity.

2. The supply voltage to the module will affect TX power, in the operating supply voltage range, the lower the voltage, the lower the TX power.

3. The module central frequency will change as the operating temperature change, use it under suggest temperature, the module can work well.

4. The antenna will strongly affect the communication distance, please select matched antenna and connect it correctly.

5. The module mount will affect the communication distance.

Features

 

 

Related Product
Applications

 

 

Pin name

Pin type

Description

3.3V

Power(Analog)

1.8 V - 3.6 V analog power supply connection.

GND

Ground

Connect to the system ground.

RESET

Digital Input

Reset, active low

P0.0

Digital I/O

CC1110 digital I/O pin P0.0

P0.2

Digital I/O

CC1110 digital I/O pin P0.2

P0.3

Digital I/O

CC1110 digital I/O pin P0.3

P0.4

Digital I/O

CC1110 digital I/O pin P0.4

P0.5

Digital I/O

CC1110 digital I/O pin P0.5

P1.0

Digital I/O

CC1110 digital I/O pin P1.0

P1.1

Digital I/O

CC1110 digital I/O pin P1.1

P1.2

Digital I/O

CC1110 digital I/O pin P1.2

P1.3

Digital I/O

CC1110 digital I/O pin P1.3

P1.4

Digital I/O

CC1110 digital I/O pin P1.4

P1.5

Digital I/O

CC1110 digital I/O pin P1.5

P1.6

Digital I/O

CC1110 digital I/O pin P1.6

P1.7

Digital I/O

CC1110 digital I/O pin P1.7

P2.0

Digital I/O

CC1110 digital I/O pin P2.0

P2.1

Digital I/O

CC1110 digital I/O pin P2.1

P2.2

Digital I/O

CC1110 digital I/O pin P2.2

ANT

RF I/O

RF output signal from PA, connect to the 50ohm antenna.

 

Note:

1. The module power supply voltage range is DC 3.0~3.6V, above DC 3.6V, the module will damage. It is recommended work at DC 3.3 V.

2. The module interface use double row headers to connect with mother board. The GND pin must connect to the system ground.

3. There is an SMA pad on the module, choose the right SMA connector and SMA antenna to fix on it.

Special character pin

 

 

1. Power amplifier (PA) control pin

CC1110’s pin P0.6 and P0.7 are used as power amplifier switch control. The right voltage level is:

RX mode: RE=0(Low);TE=1(High)

TX mode: RE=1(High);TE=0(Low)

Except the TX mode you have to set the PA control voltage at TX mode, the PA control pins should be set at RX mode to get a low power consumption.

2. EEPROM control pin(optional)

The module integrated 2~64KB EEPROM, the interface is I2C, and CC1110’s pin P2.1 and P2.2 are used as EEPROM’s clock(SCL) pin and data(SDA) pin. These two pins are also debug pins, so the EEPROM doesn’t support IAR.

If you purchase the module integrated EEPROM, we will provide the read/write code.

3. Simulation debugging interface(DEBUG)

CC1110 integrated 8051 microcontroller core support IAR, the debugging interface include clock pin P2.2(DCLK) and data pin(DDA), you can connect these two pins to the simulator interface on the programming, detail information refer to CC1110 datasheet.

4. LED driver pin

CC1110’s port P1.0 and P1.1 can supply 20mA current to drive LED directly, detail information refer to CC1110 datasheet.

5. Status output pin

CC1110’s port P1.5, P1.6 and P1.7 are configurable pins that can output internal status information useful for control software. More details refer to CC1110 datasheet.


Company Information

 

Packaging & Shipping

 

FAQ

Description

Reason and Solution

Can’t communication

1.The power supply connect not well, check the module VCC whether it is out of maximum rating.

2.The signal line connect not well, check the module SPI interface.

3.The settings of the transmitter module and receiver module are not the same. Check these modules’ register configuration.

4.Signal block. If the transmitter work with a high TX power, and the receiver was put at a short distance(<0.5m), maybe there is a signal block to make no communication.

Communication distance is too short

1.The application environment is too bad or the antenna is shield. Put the antenna to a better place outside or higher throw a coaxial line , replace it with a higher gain antenna.

2.The work space contains a same frequency interference source, or a strong magnetic field interference, power source disturbance. Try to change the carrier frequency or get far away from the source of the disturbance.

3.The power supply is not strong. Check the voltage and the current whether it is enough.

High data error

1.The power supply ripple is too big, Change the power supply.

2.Check the module register configuration, it is recommended to set as the CC1120-datasheet.

3.There is a carrier frequency interference, change the channel.

4.The antenna unmatched to the module RF interface, change another matched antenna.

 

You May Like
Not exactly what you want? 1 request, multiple quotations Get Quotations Now >>
You May Like